Recommended For You

About the Author: JUST FLY DRONE

34 Comments

  1. Eachine EX4 – JJRC X12 – C-Fly Faith
    I fought with this drone for 2 to 3 days determined to find the trick to
    calibrating it and I was ready to give up then I tried this and it
    WORKED for me over and over again so listen up and try this. 1: First
    Press the button on the back of the drone to turn it on. you now have a
    BLUE flashing light on the drone this is telling you it is trying to
    connect to the controller so turn the controller on and when it is
    connected the light on the drone will turn GREEN and it will be flashing

    NOW connect the phone to your controller. now on the phone, it should
    say in preparation, but your NOT ready to do the calibration
    yet,
    what until the light on the drone goes GREEN and is NOT flashing now on
    your phone should say READY-GO BUT It's NOT READY. NOW it's ready
    for the calibration
    because you have enough satellite lights only when the light goes green
    and
    not flashing. The lights on the controller are ONLY telling you what
    the mode you're controller is in and NOT that you are connected to anything
    some people thought that. NOW this is what I MUST DO to get the
    dam thing to calibrate, the horizontal works fine every time BUT I
    could
    NOT get the vertical to work it would say it was a success but it was
    NOT. the drone was still in calibration mode. On the drone, it has a

    RED/GREEN light flashing which is vertical calibration mode. SO what to
    do? well, this works for me 7 out of 10 times instead of never working
    at all. When you do the calibrate first off some apps say calibrating in

    blue on the phone when you see that it ISN'T tap the blue calibrating
    Button
    again until you see it say TURN THE DRONE the light on the drone will
    start flashing from green to red/blue I have seen some people try to
    calibrate it when it was NOT ready to do so. NOW when it says turn the
    drone horizontally do it about 3 times the light on the drone turn to
    RED/GREEN the horizontal calibration
    is dun and NOW the trick that works about 7 out of 10 times for me WHEN
    it tells you to put the camera up and turn it watch your phone and PUT
    the
    camera DOWN give it a quick half-turn then do it again if you don't see
    your phone then tell you to turn it again do another half turn but if
    you do see on your phone turn it again flip the Drone camera up
    words
    and then turn it two or three times the light on the drone should go
    green and not be flashing. This almost works every time for me and it's
    the ONLY way I can get it to calibrate. And It's JUNK

  2. dont buy the x12 the app need to fly this drone no longer exist , when you write to the company or developer they reject your email , dont waste your money , imagine a developer no longer interested in the drone app

  3. Okay, both the Zino and the FiMi are a little better than the Eachine. But i choose to buy the Eachine.

    The difference between prices for so little advantage.

  4. Idk how the heck all the footage from the Zino and EX4 looked that good; But the A3 looked SO bad and stutters a LOT! My A3 Looks Magnificent and there's no need for any post processing either, and it looks 5 times better than all 3 of those just shown… Have you updated the Fimi to the latest firmware for the camera, Controller, etc… If not I'm gonna say that's the issue right there, or you put in a cheapy POS Micro SD and it didn't like the Fimi lmaooo Here is the link to the video, and this is in even LOWER Light than used in this comparison video…
    Fimi A3 – Actually has usable High Quality 1080p footage, NOT the garbage you saw up above! – https://www.youtube.com/watch?v=ZeugXEwDoRQ&feature=youtu.be

  5. GARBAGE, JJRC X12 AND GEEKBUYING COMPANIES DO NOT BACK THEIR PRODUCTS, NO REPLACEABLE PARTS, AND IT WILL COST YOU MORE TO SHIP BACK THAN WHAT YOU PAID FOR IT SO THEIR RETURN POLICIES ARE A TOTAL JOKE!!! RECEIVED MINE WITH A DEFECTIVE NON FUNCTIONING GIMBAL AND ZERO SUPPORT FROM EITHER OF THE COMPANIES!! DJI OR A COMPANY THAT SERVICES THE PRODUCT IN THE STATES IS THE ONLY WAY TO GO!! I will do a youtube upload soon! JK

  6. 1: X12/Zino
    2: A3
    I was really surprised by the Eachine, your Zino quality is better than mine, Other than bright sun my Zino focus is just soft. Very good comparison

  7. They all look pretty crap. Shame it's not a clear sunny day. Suprise the echine is so good considering its bad image reputation. I would be upset spending the extra on Zeno to have such a crap image but the co!ours are nicer. For me echine seems better value smaller to carry but the 5 hour charge time which no one mentions is a big turn off. Option for slow motion from Zeno would be nice using 60 fps…and smooth…

  8. hello, can you tell me, if my samsung galaxy s4 which has wifi 802.11ac, can operate eachine ex4 thank you very much
    Qualcomm Snapdragon S600 processor – 1.9 GHz
    OS version tested 4.2.2 (Jelly Bean)
    Samsung Galaxy S4 LTE GT-i9505 16GB.
    Primary 4G / 5G network LTE 800/850/900/1800/2100/2600
    A2DP, WiFi 802.11 a / b / g / n / ac (2.4Ghz, 5Ghz) and NFC technology

  9. Got to be honest! I think the little eachine x4 n zino r not to different. Fimi a3 picture really sux . Like the way u compared drones. I think I am getting the x4 as my very first drone. Cheers bruss.

Comments are closed.